Ignition switch cover decal for V2 Ignition Switch Bezel for G-model (1974 – 1998)

Our Version 2 ignition switch bezel allows for material, wood, or any other graphics.  This decal is laminated for long-lasting protection. Simply screw on your V2 Ignition Switch Bezel tight.

How do you perfectly place your bezel decal? It’s super simple just don’t rush it. Install Bezel First and mark the position with a marker where the decal needs to be placed or installed while on the car. 

1. You will need to install Bezel first on the car nice and tight. Use a Sharpie or marker to mark the top position. Then remove and install the decal or material if the material needs a certain direction.

2. You will need a spray bottle or anything to wet the bezel and supplied Squeegee

3. Spray the bezel with a slightly soapy water.

4. Place the decal in the center of the bezel. Move/rotate the decal to the desired location. With this, you will also distribute the water onto the decal.

5. Use a squeegee or finger to press out the water and gently work your way around.

6. Use a squeegee and press the inner and outer corners wiping off any excess water with Mirco fiber.

7. Done! Now re-install the bezel once the Decal is installed or the Material is glued. Everything should line up.